Final exam is getting closer

We are getting close to the moment you've all been waiting for. Final examination season just heading in front of us. Time has been walking continously close to the date we shall be sit in the exam hall LOL. Ease the stress with my five study tricks.

1) Come fully prepare final exam
2) make study schedule
3)Study with your worst subject to the easiest last
4)Pace yourself wisely during test taking
5)READ THE DIRECTION CAREFULLY

No 5 I almost did from the previous final examination. My mind went STUCK as i knew i had done carelessly go through  exams without accurately answering what the question is asking. The direction asking 5 question had to be answered. I answere 4 instead. Release me, I had good carry mark. But what a waste is my 20 marks just thrown in the dustbin freely.  BURN!!!!..


DOnt lack of sleeping afraid it would affect your thinking.
Taking Care of your health and mind too.


MOOD :

Now, I am stuck all night studying and that seems to be the reason for lack of sleep across the board. I went to sleep at 2-3 am. . I got 2-3hours of sleep. Woke up at 6-6.45 am for subuh :D, then continue study until my mind is STUCK or my eyes just getting to close. I was taking a nap for awhile before i finished my revision. LOL..

                    

This is truly madness I've never ever felt the whole of my life. I felt so dissapointing and irritating with whom had broken the machine that I was badly want to use the machine. I just only 3 samples left to re extrude before I can finish up all my samples. How could this bad things happen in my life. The worst is technicials has a course outside UIAM leading me getting more upset. The machine was just can be used after had unstable temperature now bende lain pulak jadinya. So exhausted with this stupidity occurance.

Nevertheness, putting first things first is important because I realize that the little decisions in life are actually big decisions. I've to assign greater importance to a task than it merits. Commonly, this is where a task is more interesting than some of the more mundane, yet still important jobs.

This means to make things important, but not urgent.

"To put first things first is just getting the important things done before you do other things that you want to do. "Put first things first" means basically plan ahead, and be a "Prioritizer""

In the first instance, during my mid break, I decide to complete all my assignment, my lab reports and my fyp report. Instead doing nothing all day, I should getting done all works assigned to me. Nevertheness it wont make me streessful as the burdens I carry on become lesser.

"Take out your homework and figure out which homework is due soonest, which homework is the hardest, and which homework you can finish during your school day if you must. Stack the paper or books in a pile from earliest that can't be done in school to homework that isn't due earliest or that can be done in school."

Yes, these problems dont ever look it tough, just try to solve all the assignments given step by step and finish up little by little. Dont make your life too rush, attempting to solves all at one time its too redicilious things. your works even more unproductive and unqualified at all.

Don’t let procrastination take over your life. Here, I will share my personal steps which I use to overcome procrastination with great success.

1) Break your work into little steps.

2)Change your environment. Different environments have different impact on our productivity. Look at your work desk and your room

3)Hang out with people who inspire you to take action. I dont inspired people which is living cloose to me. Instead reading the materials that booth up my confidential. Bill gates for instance could be something owesome to spend with.

4)Get a buddy. Having a companion makes the whole process much more fun. Accompanied by my buddy is important because not me alone have to settle up my works instead my friend has too!!!

5)Get a grip and just do it. At the end, it boils down to taking action. You can do all the strategizing, planning and hypothesizing, but if you don’t take action, nothing’s going to happen.

These tips work best for me.When my works getting lesser to finish, I can spend much time to watch the movie going out with friends and shopping. 

"So stress, I have to learn to be more patient. Indeed I believe Allah always be my side and I make a doa asking Allah for health, wealth, sustenance, ease, or whatever else I may need."

This problem.... I hate so much when it occur to me + I have to do FYP on my own. In addition whatever problem may occur, I have to bear on my shoulder. NO one might share the same problems. I have to walk here and there, calling to whom i might think he/she knows, thinking what is my plan A , B or C .Sometime I feel sooo fed up!..

The troubleshooting is common  in extruder machine where the temperature change does not working out properly and not stable. When I obeserved the temperature change does not increase or decrease the level off and doesnt go flat to the temperature I have setting up.Nothing much I could do instead I have to shut back off all the equipments and go back to mahallah. Consequently I could not proceed the experiment since the PLA need to be entruded within 160c.for 180c, I should do flushing to remove all the dusts, debris & other materials which are still left in the screw. It's important to keep extruder clean for proper functioning  before putting  PLA. This is a distraction, my works has been interrupted, & not getting work done with this stupid problem. haihh . YOU KNOW HOW MUCH I WORRY ABOUT.
 

 
The temperature does not report the right temperature.
Maybe the heater has been hooked up. the problems need to be fixed up.

My extruded motor /screw is not running
i should shup all the machine and cmputer off. Then redo from the beginning. =.='

My extruded stop running in sudden.
SO IRRATATING ME!!!.. This could be bad.Hey you shouldn't do this to me. You know how many hours i have to spend to extrude 1100 g of PLA. You know how much is it? banyakkkk!!!..It happened to me, fortunenatly it occured when i do flushing. what a relieve!!.

JANGAN BIMBANG ALLAH KAN ADA!!!!

Ask Allah for patience

The first step should I do for FYP is to provide sample preparation for ple / KF / OMMT for fracture toughness. How to prepare this sample is relatively easy but a bit difficult, because I need to fill the ingredients in the extruder but cannot spill some amount. Furthermore, after I use the extruder, I have to use the crashing machine to crush the material into pieces, there is possibility for material loss to occur as well. So I do not want too much loss of material, I have to weigh the sample is more than the actual amount. So, that the way i should do as being explained by my seniors. Thanks you guys..

MISTAKEN I WONT FORGET
What made me so sad yesterdayy!!!, i just want to get a step to start off my experiment, but i've already made a mistake. Eventhough just a small mistake, but it has effected the whole procedure.. argh stress!.I forgot to change the temperature from 180c to 160c. That showed me i was so careless and unconcentrate what bro Kaiser said just before i start to do my experiment. " saya tak dgr lah bro cakap, padahal memang dah tau kene tukar temperature tu" =.='.

 "I have to repeat again, start from the beginning to finish up all the samples i should prepare. The time is passing so fast, so i have to move forward quickly".

Undo edits

THIS IS ONE OF THE RESEARCH MADE BY MY SUPERVISOR DR HAZLEEN ANUAR

It has been almost fourth year since i have started in engineering course during my first degree at University Islam Antarabangsa Kuala Lumpur. (IIUM).  I don't think I've ever regretted my decision to do the course, in fact, I could be happier about it.

During my second year,  we have to choose any majoring courses available to pursue our study in engineering. Neither one shall make recommendations nor give advices that I should take this majoring, but by knowing the abilities and my weaknesses in lessons during my first year. i choose material!.

and NOW!!! iI’m now officially in my final year at university, from now on every day is part of the inevitable countdown to my introduction into the adult world and all the delights of commuting, wearing baju kurung and paying council tax. What worries me the most about this year is that I still cannot decide what I’d like to do after I graduate.ahh too early to thinking about adult matters..but what is the most worrying me now is what should I do with my FINAL YEAR PROJECT??. plus  I have to deal with it on my own with either no pear, or no partnership but only me!!.

I have to put on more efforts and more hardworking. Planning plays an importance role at this moment, where i've been splitted between fyp, academia and revisions.  I can feel my stress level starting to change. Thinking maturely all of the aspects, and my lifestyle has also changed tremendously.Really struggling to manage my workloads, my life and other commitments.How I tend to cope with all my responsibilities while trying not to be tied down only into one  set time schedule. Maybe I can try it but it is not for all people and sometimes it can be stressful but you get to relieve that stress alot more often so it doesnt get as pent up inside you. At least ,my way of making a schedule it will relieve a level of stress.So your life more go with the flow and be spontaneous with the plan ahead. ahaha!! hope so. or maybe not going as planned.